*NEW* Kel-Tec Extended Length Handguard -C California 20″ Barrels – OD Green

(1 customer review)

$199.00

5 in stock

SKU: 1019 Category:

Description

Introducing the “Long” handguard for the Kel-tec RDB. Designed specifically for the 20″ California models, this is 3″ longer than the current RDB handguard and will extend out to the full length of those two weapons.

 

This is for the OD Green RDB-C

 

The Hunter model is a different item as I have to modify the rear mounting area to fit the California featureless shell.

 

These 6061-T6 Handguards will NOT fit your Survival 16″ or standard 17″ barrels.  They will not currently fit over a suppressor – we will start working on a suppressor-friendly long handguard soon.

 

Installation is simple.  We re-designed the front stay to allow the silver standoff to tap in as easily as the original Kel-Tec push pin.  We then added a tensioning set-screw on the bottom of the front stay to lock the standoff in position against the stay for a rock-solid lock-up.

 

To install, simply removing your original plastic rail.  Place the U-shaped stay PERFECTLY aligned around the gas block where the single push-pin holes are lined up.  Getting this off-center and forcing the standoff will damage these parts.  Using a brass or plastic or rubber mallet (NO hammers), tap the silver standoff through the u-shaped stay and the rifle’s push pin hole in the gas block until perfectly centered.

 

Tighten the bottom tensioning set screw – this already has yellow loctite on it.  It’s a 6-32 allen head screw.  When this is tight (8-12 inch pounds), remove the four 6-32 screws out of the front stay corners then slide the handguard on from front to rear, then re-insert all four screws.  Tighten all of these plus the rear 4 screws on the rear posts and you’re done.

 

If it takes more than 5 minutes or you don’t understand it or you feel like you are forcing it STOP and email me for assistance or take it to a local gunsmith.

 

Thanks for your business!

Additional information

Weight 1 lbs
Dimensions 18 × 4 × 4 in

1 review for *NEW* Kel-Tec Extended Length Handguard -C California 20″ Barrels – OD Green

  1. Jesse Gifford

    Got this OD hand guard from Lifeindustries the other day. First off, i had thought it was going to take a very long time to receive, based on how much the company emphasized not to email them right away, and that it may take time to ship.

    Well, that was NOT the case. It shipped out very quick, and i got it right away. Installation was EASY. It was not rocket science, and if you need a little help there are youtube vids. The only little gripe i had was that the size stated for the locking nut allen key size, was not correct, it was smaller. Not a big deal.

    Finally, once installed it looks beautiful. The Kel tec gets very hot after only a few shots. This hand guard, not only keeps your hand further away from the hot barrel, but since it is vented it actually aids in cooling the gun down.

    This makes an already cool looking gun even cooler. I ordered from another website, some OD green magazines, and an angled m lok fore grip in OD green, to add to this as well. With my optic site, and all these upgrades, especially this hand guard from these guys, and you have an incredible .233/5.56 spitting machine.

Add a review

Your email address will not be published. Required fields are marked *